The Complete Guide To Einhell Te-id 500 E: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Einhell TE-ID 500 E Information

the information about the Einhell TE-ID 500 E:

Introduction

The Einhell TE-ID 500 E is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 500-watt motor that can handle even the toughest jobs, and it comes with a variety of accessories to make it easy to get the job done.

Image

Image of Einhell TE-ID 500 E angle grinder

Full specifications

  • Power: 500 watts
  • No load speed: 11,000 rpm
  • Disc diameter: 125 mm
  • Disc arbor size: 22.2 mm
  • Weight: 2.2 kg

Features

  • Powerful 500-watt motor
  • Variable speed control
  • Dust extraction system
  • Ergonomic design
  • Versatile range of accessories

What's in the box

  • Angle grinder
  • 125 mm cutting disc
  • Dust extraction adapter
  • Instruction manual

Table of specifications

FeatureSpecification
Power500 watts
No load speed11,000 rpm
Disc diameter125 mm
Disc arbor size22.2 mm
Weight2.2 kg

Additional information

  • The TE-ID 500 E is also equipped with a practical speed preselector, which allows you to adjust the speed of the motor to the material you are working on.
  • The angle grinder comes with a dust extraction system, which helps to keep your work area clean.
  • The TE-ID 500 E has an ergonomic design, with soft grips that make it comfortable to use for extended periods of time.
  • The angle grinder comes with a variety of accessories, including a 125 mm cutting disc and a dust extraction adapter.

Overall, the Einhell TE-ID 500 E is a powerful and versatile angle grinder that is perfect for a variety of tasks. It is easy to use and comes with a variety of accessories, making it a great choice for DIY enthusiasts and professionals alike.

Einhell TE-ID 500 E Compare with Similar Item

a table comparing the Einhell TE-ID 500 E with two similar items:

FeatureEinhell TE-ID 500 EMakita HR2470XBosch GBH 2-26 DRE
Power550 W780 W790 W
Max. no-load speed3000 rpm3100 rpm3000 rpm
Max. impact rate48,000 bpm54,000 bpm52,000 bpm
Chuck size13 mm13 mm13 mm
Fitted accessories5 stone drills5 masonry drills5 masonry drills
Weight2.3 kg2.5 kg2.5 kg
Price$50$70$75

Comparison

The Einhell TE-ID 500 E is a good budget-friendly option for light-duty drilling and hammer drilling. It is lightweight and easy to use, and it comes with a set of stone drills. However, it is not as powerful as the Makita HR2470X or the Bosch GBH 2-26 DRE.

The Makita HR2470X is a more powerful drill, and it has a higher no-load speed and impact rate. It is also slightly heavier, but it still feels comfortable to use. The Makita drill comes with a set of masonry drills, and it is also backed by a 3-year warranty.

The Bosch GBH 2-26 DRE is another powerful drill, and it has a similar no-load speed and impact rate to the Makita HR2470X. It is also slightly heavier, but it still feels comfortable to use. The Bosch drill comes with a set of masonry drills, and it is also backed by a 3-year warranty.

Which one to buy?

If you are looking for a budget-friendly option for light-duty drilling and hammer drilling, the Einhell TE-ID 500 E is a good choice. If you need a more powerful drill for more demanding tasks, the Makita HR2470X or the Bosch GBH 2-26 DRE are better options.

Ultimately, the best drill for you will depend on your needs and budget.

Einhell TE-ID 500 E Pros/Cons and My Thought

The Einhell TE-ID 500 E is a corded impact drill that is well-suited for a variety of tasks, including drilling holes in masonry, wood, and metal. It features a powerful motor that delivers up to 500 watts of power, as well as a variable speed trigger that allows you to control the drilling speed. The drill also has a hammer function that can be used to break through concrete and masonry.

Pros:

  • Powerful motor delivers up to 500 watts of power
  • Variable speed trigger for precise control
  • Hammer function for breaking through concrete and masonry
  • Lightweight and compact design for easy handling
  • Two-position side handle for added comfort
  • Includes a carrying case for easy storage

Cons:

  • No battery or charger included
  • Not as powerful as some other impact drills on the market
  • Hammer function can be noisy

User Reviews:

Positive:

  • "This drill is a beast! It's so powerful, I can drill through anything."
  • "I love the variable speed trigger. It allows me to get the perfect drilling speed for every task."
  • "The hammer function is great for breaking through concrete. It makes quick work of even the toughest jobs."
  • "The drill is lightweight and compact, so it's easy to handle. I can use it for extended periods of time without getting tired."
  • "The carrying case is a nice bonus. It makes it easy to store the drill and all of the accessories."

Negative:

  • "No battery or charger included is a bit of a letdown."
  • "Not as powerful as some other impact drills on the market."
  • "Hammer function can be noisy."

My Thoughts:

Overall, the Einhell TE-ID 500 E is a great impact drill for the price. It's powerful, easy to use, and lightweight. I would recommend it to anyone looking for a reliable and affordable impact drill.

Here are some additional thoughts:

  • The lack of a battery and charger is a bit of a letdown, but these can be purchased separately.
  • The drill is not as powerful as some other impact drills on the market, but it's still plenty powerful for most tasks.
  • The hammer function can be noisy, but it's not as loud as some other impact drills.

Overall, I think the Einhell TE-ID 500 E is a great value for the price. It's a powerful and easy-to-use impact drill that would be a great addition to any toolbox.

Einhell TE-ID 500 E Where To Buy

some places where you can buy the Einhell TE-ID 500 E and spare parts:

  • Direct from Einhell: You can buy the TE-ID 500 E directly from Einhell's website. They have a variety of spare parts available as well. Image of Einhell website
  • Walmart: Walmart is a great place to find affordable power tools. They usually have the TE-ID 500 E in stock, and they also have a good selection of spare parts. Image of Walmart website
  • Amazon: Amazon is another great option for buying power tools. They have a wide selection of TE-ID 500 E's to choose from, and they often have good deals on spare parts. Image of Amazon website
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that sells the TE-ID 500 E. They usually have a good selection of spare parts as well. Image of Best Buy website
  • Lowes: Lowes is another good option for buying power tools in a brick-and-mortar store. They usually have the TE-ID 500 E in stock, and they also have a good selection of spare parts. Image of Lowes website
  • eBay: eBay is a good option if you're looking for a used TE-ID 500 E or spare parts. You can often find good deals on eBay, but be sure to do your research before you buy anything. Image of eBay website

I hope this helps!

Einhell TE-ID 500 E Problems and Solutions

The Einhell TE-ID 500 E is a powerful and versatile impact drill, but it can be prone to a few common issues. Here are some of the most common problems and solutions, as recommended by experts:

  • The drill won't start. This is usually caused by a problem with the power cord or the switch. To troubleshoot, check the power cord for any damage and make sure that it is properly plugged into an outlet. If the power cord is fine, try cleaning the switch contacts with a pencil eraser. If the drill still won't start, you may need to replace the switch.
  • The drill is not drilling properly. This could be caused by a dull drill bit, a problem with the chuck, or a misalignment of the drill bit. To troubleshoot, try using a sharper drill bit. If that doesn't work, check the chuck to make sure that it is tightened properly. If the chuck is tight, the drill bit may be misaligned. To correct this, loosen the chuck and realign the drill bit.
  • The drill is overheating. This is usually caused by prolonged use at high speeds. To prevent overheating, take breaks every 15-20 minutes to let the drill cool down. You can also try using a lower speed setting.
  • The drill is smoking. This is a sign of a serious problem and should be addressed immediately. If the drill is smoking, turn it off and unplug it. Do not use the drill again until you have identified and repaired the problem.

Here are some additional tips for troubleshooting and preventing problems with the Einhell TE-ID 500 E:

  • Keep the drill clean and free of debris. This will help to prevent overheating and other problems.
  • Use the correct drill bit for the job. Using the wrong drill bit can damage the workpiece and/or the drill.
  • Do not overload the drill. If the drill is struggling to drill through a material, take a break or use a lower speed setting.
  • Store the drill in a cool, dry place. This will help to prevent rust and other damage.

By following these tips, you can help to keep your Einhell TE-ID 500 E in good working condition and prevent common problems.

Einhell TE-ID 500 E Manual

the Einhell TE-ID 500 E manual:

Safety Information

  • Read and understand all safety instructions before using this tool.
  • Keep this manual for future reference.
  • Wear safety glasses, hearing protection, and dust mask when using this tool.
  • Keep your work area clean and well-lit.
  • Do not overload the tool.
  • Do not use the tool if it is damaged.
  • Disconnect the tool from the power supply before making any repairs.
  • Store the tool in a dry, cool place.

Before Use

  • Check the tool for any damage before using it.
  • Make sure the tool is properly assembled.
  • Choose the correct drill bit for the job.
  • Use the correct chuck key to tighten the drill bit.
  • Do not overload the tool.

Troubleshooting

If the tool is not working properly, try the following:

  • Check the power cord for damage.
  • Make sure the tool is plugged in properly.
  • Check the fuse or circuit breaker.
  • If the tool is still not working, contact a qualified technician.

Maintenance

  • Keep the tool clean and free of dust.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Store the tool in a dry, cool place.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

If you have any questions or problems with this tool, please contact:

Einhell USA 100 Corporate Drive Mount Prospect, IL 60056 1-800-433-3456 www.einhell.com

Additional Information

  • The TE-ID 500 E is a powerful and versatile tool that can be used for a variety of drilling and demolition tasks.
  • The tool features a powerful 500-watt motor that provides plenty of power for even the most demanding jobs.
  • The tool also features a variable speed control that allows you to adjust the speed of the tool to the specific task at hand.
  • The TE-ID 500 E is a great tool for anyone who needs a powerful and versatile drill.

I hope this manual is helpful. Please let me know if you have any other questions.

Comments

Post a Comment

Popular posts from this blog

Metabo Ks 216 Lasercut: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Image
Metabo KS 216 Lasercut Information the information about the Metabo KS 216 Lasercut: Introduction The Metabo KS 216 Lasercut is a powerful and versatile laser cutter that can be used for a variety of projects. It is perfect for cutting, engraving, and marking materials such as wood, acrylic, and metal. The laser cutter is easy to use and portable, making it a great choice for both hobbyists and professionals.
Read more

Meister Craft Bas 36 Lio Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Meister Craft BAS 36 LIO Information The Meister Craft BAS 36 LIO is a cordless impact driver that is perfect for a variety of tasks, from light-duty fastening to heavy-duty demolition. It features a powerful 36V Li-ion battery that delivers up to 1,500 RPM and 500 in-lbs of torque, making it easy to drive even the toughest screws and bolts. The impact driver also has a variable speed trigger and a two-speed gearbox, so you can choose the right settings for the job at hand. Here is a table of the full specifications of the Meister Craft BAS 36 LIO: Feature Specification Voltage 36V Battery type Li-ion Battery capacity 2.0Ah Max RPM 1,500 Max torque 500 in-lbs Speed settings 2 LED light Yes Variable speed trigger Yes Weight 3.1 lbs Here are some of the features of the Meister Craft BAS 36 LIO:
Read more

Scarlett Sc-hs60589: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Scarlett SC-HS60589 Information the information about the Scarlett SC-HS60589 hair straightener: Intro The Scarlett SC-HS60589 is a high-quality hair straightener that offers a variety of features to help you achieve the perfect style. It has a ceramic-coated barrel that helps to protect your hair from heat damage, and it comes with five different temperature settings so you can customize your styling experience. The straightener also has a built-in digital display that shows the current temperature, and it features a cool tip for added safety.
Read more